Toro 60" (152 cm) 25.5 HP 852cc (74950)

$7,200.00


Stock Image: Model Shown 74956

Stock Image: Model Shown 74956

New/Used
Used
Usage
285 Hours
Availability
In Stock
Location
ProCore Power Equipment LLC
Title
Not Applicable
Condition
Good
Manufacturer
Toro
Model
60" (152 cm) 25.5 HP 852cc (74950)

Overview

Dealer Insights

Demo unit; 4 years of Warranty remaining

Description

Commercial 3000 Series 60" (152 cm) 25.5 HP 852cc (74950)



Z Master Commercial 3000 Series mowers deliver impressive commercial-grade results and durability, all at an outstanding value. Powerful commercial-grade 25 HP Kohler® Command Pro EFI 747cc engine with 60" TURBO FORCE deck.

  • Professional quality performance from the 25.5 HP Kawasaki FX 852cc Engine
  • 60 in (152 cm) TURBO FORCE deck features heat-treated steel blades and our patented adjustable discharge chute, nothing cuts as fast or as well
  • Superior Fuel Economy - up to 25% better fuel economy than equivalent carbureted engines
  • Super fast 18,300+ ft./min blade tip speed, high-lift, flex-resistant 1/4" thick heat-treated steel blades
Features
  • Exclusive TURBO FORCE Deck: High-capacity TURBO FORCE decks deliver unsurpassed strength, a superior cut, and increased productivity in extreme mowing conditions. Equipped with a patented adjustable baffle, TURBO FORCE decks can be fine-tuned in order to conquer changing turf conditions.
  • 7-Gauge, High-Strength Steel: The TURBO FORCE deck is constructed of 7-gauge, high-strength steel which is 33% thicker and 32% higher in yield strength than ordinary 10-gauge commercial steel used in 7/10 decks. The combined effect is 75% stronger, so it easily handles the most demanding conditions and resists damage from impacts and abrasion.
  • Industry's Toughest Spindle Assemblies: Toro's rugged spindle assemblies survive impacts that would destroy lesser spindles. A stout cast iron housing with a massive base and six mounting bolts absorbs impact loads and distributes them across a broader area of the deck shell. Plus, the solid, one-inch diameter shaft is alloy steel, not the common lower-grade steel used in many competitive models. 72" Deck will have tapered bearing only.
  • A Flat Crisp Cut with Precision Blades: (.250) thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.
  • Convenience and Comfort: Operator controls are conveniently located. Large 1-5/8" (4.1 cm) diameter steering levers increase comfort and reduce fatigue. Handy storage compartment provides location for cell phone, tools, and more. Built-in cup holder provided.
  • Rubber Discharge Chute: High performance rubber discharge chute allows for close trimming without damaging chute or landscape structures. Patented design provides exceptional clipping dispersion.
  • Rugged Frame: A commercial-grade carrier frame, constructed of 3" x 1.5" tubular steel, supports the cutting deck and stands up to the rigors of professional use.
  • Folding Rollover Protection System ROPS: A Rollover Protection System (ROPS), complete with seat belt, comes standard for operator protection in the case of accidental rollovers and tipovers. In situations where sufficient vertical clearance is not available, such as loading on an enclosed trailer, the ROPS can be temporarily unlocked and folded down.
Specifications
  • Engine: 25.5 HP Kawasaki FX 852cc
  • Fuel Capacity: Gasoline - 8 gallons
  • Adjustable Discharge Baffle: Standard
  • Air Filter: Heavy-Duty Canister
  • Anti-Scalp Wheels: 4 Standard, 1 Optional
  • Blade Tip Speed: 18,300+ ft/min (5,577.8 m/mim)
  • Blade Type: .25 in (.6 cm) thick heat-treated steel
  • Carrier Frame: 3" x 1.5" x 10 gauge
  • Caster Tires: 13" x 6.5"-6" pneumatic
  • Deck Design: 7-gauge 60 in (152 cm) TURBO FORCE® w/bull-nose bumper
  • Discharge Chute: Rubber
  • Drive Tires: 24" x 12" - 12"
  • Ground Speed: 10 mph forward
  • Height of Cut: 1.0" -5.5" in 0.25" increments
  • Hour Meter: Standard
  • Hydraulic Fluid: Premium synthetic
  • Ignition: Electric Start, Standard
  • ROPS: Folding; standard
  • Seat: Premium Bolstered
  • Spindle Bearings: Greasable ball bearings
  • Spindle Housing: 9" diameter cast iron
  • Steering Controls: 1-5/8" diameter grips; adjustable, dampened
Accessories
  • E-Z Vac™ DFS Collection System: Quiet and powerful, the Toro E-Z Vac™ collection system is spindle-driven and offers quick conversion between bagging and side discharge without tools.The horizontal blower impeller is positioned parallel to, and above the mower deck creating continuous airflow from deck to collection system. The Dump-From-the-Seat (DFS) features allows you to dump debris in only seconds - without ever having to leave your seat!
  • E-Z Vac Twin & Triple Bagger Systems: Toro® Z Master® E-Z VacTM Twin and Triple Baggers deliver the convenience and versatility essential to landscape professionals' productivity. The no-tools, quick-release design allows you to remove the collection system with ease, making it a snap to alternate between bagging and side-discharge.
  • Light Kit: The lights easily mount to the mower frame and wiring quickly connects to the existing accessory circuit.
  • Operator-Controlled Discharge Chute: Landscape friendly rubber discharge chute provides complete control of clippings. with three discharge settings, from wide open to blocked, the OCDC will put the clippings where you want them and not in beds, streets, etc. The integral design allows the discharge chute to remain in place and on the machine, reducing the risk of personal injury and property damage.
  • Optional Blades: In addition to the high sail blade, which comes standard on Z Master® Z590 Series mowers, additional 1/4" (6 mm) blades are available to match regional and seasonal mowing conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.
  • Recycler® Mulching Kits: Recycler mulching kits deliver the industry's finest mulching performance and reduce mowing time up to 38% vs. bagging.
  • Roller Striping Kit: Roller striping kit is easily installed and provides a premium "ball park" after-cut appearance.
  • Toro Z Stand: Exclusive Toro Z Stand provides an on-board tool to simply elevate the front end of the machine and provide access to the underside of the deck.

Specs

Engine

Engine Manufacturer
Kawasaki FX
Horse Power
25.5 HP
Displacement
852cc

General

Wheel Size
Drive Tires: 24 in. x 12 in. - 12 in.; Caster Tires: 13 in. x 6.5 in.-6 in.
Fuel Capacity
8 gal.

Deck

Deck Size
60 in.